Functional Description - Festool T12+3 Manual De Instrucciones

Cordless drill T15+3
Max. torque
soft material (wood)
hard material (metal)
Adjustable torque
1st/ 2nd gear
Chuck clamping range
Max. drill diameter in
Tool holder in drill spindle
Weight without battery
Cordless drill T18+3
Motor voltage
Idling speed 1st gear
(Speed specifications with fully charged battery
pack. The speeds relating to LiIon packs are
reduced.)
Max. torque
soft material (wood)
hard material (metal)
Adjustable torque
Battery Pack
Voltage
Capacity
Weight
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Buttons for releasing the battery pack
[1-2] Bit store
[1-3] On/Off switch
[1-4] Right/left switch
[1-5] LED lamp
0.5 - 8 Nm
1.5 - 13 mm
Wood 35 mm (1.48")
Metal 16 mm (0.63")
1.02 kg (2.2 lbs)
0 - 450 rpm
2nd gear 0 - 1500 rpm

Functional description

Cordless drill T18+3
27 Nm Chuck clamping range
40 Nm Max. drill diameter in
Tool holder in drill spindle
Weight without battery
Charger
Mains voltage (input)
1/4 ''
Mains frequency
Charging voltage (output)
Rapid charging
18 V Conservation charging current,
pulsating (only NiCd, NiHM)
Charging times
for
Permitted charging tempera-
ture range
30 Nm
Temperature monitoring
45 Nm
BPC 12 Li
10,8 V
3.0 Ah
0.49 kg (1.08 lbs) 0.58 kg (1.28 lbs) 0.68 kg (1.50 lbs)
[1-6] Gear switch
[1-7] Drilling symbol
[1-8] Screwdriving symbol
[1-9] Drilling/Fastening selector switch
[1-10] Capacity display
[1-11] Belt clip*
[1-12] Torque thumbwheel
* not on all versions included in the scope of deliv-
ery
1st/ 2nd gear
Wood 45 mm (1.78")
Metall 16 mm (0.63")
1.05 kg (2.3 lbs)
TRC 3
approx. 0.06 A
LiIon 1.5 Ah/ approx. 25/ 55 min
3.0 Ah, 80 %
LiIon 1.5 Ah/ approx. 35/ 70 min
3.0 Ah, 100 %
-5 °C to +45 °C
via NTC resistor
BPC 15 Li BPC 18 Li
14,4 V
3.0 Ah
0.5 - 8 Nm
1.5 - 13 mm
1/4 ''
120 V ~
60 Hz
7.2 - 18 V=
max. 3 A
18 V
3.0 Ah
9