Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3.3
Installing the bracket in
ceramic tile
Drill a 1/4 in. based on the pre-drill pilot hole
Tap 1/4 in. solid wall anchors (F) into the wall
with a hammer until ush with the wall.
Align the mounting brackets (B) with installed
solid wall anchors (F) and secure with the
mounting screws (C).
Care and Cleaning
These bath accessories are designed for years of trouble-free performance. Keep them looking new by doing the following:
Clean periodically with a soft cloth.
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the nish and void your warranty.
Warranty
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay
products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product
or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-5224) to
receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all Glacier Bay
warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty excludes all
industrial, commercial & business usage, whose purchasers are hereby, extended a ve year limited warranty from the date of purchase, with all other
terms of this warranty applying except the duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
This warranty gives you speci c legal rights and you may also have other rights that vary from state to state and province to province. Please see a store or
contact 1-855-HD-GLACIER for more details.
F
F
B
C
4.1
Assembling towel bar onto posts
Align cut-out on ends of towel bar with stepped notch on inside of
post openings.
Slide each end of the bar into the two posts. Once assembled,
notch will prevent rod from spinning.
4.2
Installing the bathroom accessory
Attach the towel bar to the mounting brackets (B) using the set
screws (E). Tighten securely with the Hex wrench (D).
B
D
2
Please contact 1-855-HD-GLACIER for further assistance.
E
D
HOMEDEPOT.COM/GLACIERBAY
Publicidad
