Sharp GS-XPM7FR Manual De Instrucciones página 17

AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Press the AUX. button using a thin stick
on the indicator panel.
• The red OPERATION lamp (
will light and the unit will start operating in
the AUTO mode.
• The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the AUX. button again.
• The red OPERATION lamp (
will turn off.
NOTE:
If the AUX. button is pressed during normal operation, the unit will turn off.
MAINTENANCE
Be sure to disconnect the power cord from the wall outlet or turn off the circuit
breaker before performing any maintenance.
CLEANING THE UNIT AND THE REMOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. We can cause electrical shock or
equipment damage.
• Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the COOL
mode, temperature setting 32°C,
for about half a day to allow the
mechanism to thoroughly dry.
2
Stop the operation and unplug
the unit. Turn off the circuit
breaker, if you have one exclu-
sively for the air conditioner.
3
Clean the filters, then reinstall
them.
) on the unit
) on the unit
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1
2
3
E-15
AUX.
Make sure that the air filters are
not dirty.
Make sure that nothing obstructs
the air inlet or outlet.
Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.