Installation
Clearance requirement
This clearance requirement is applicable for washers only.
NOTE
• For dryer's clearance requirement, see the dryer's user manual.
• If the washer and dryer have different clearance requirements, use the one with the
larger value.
Alcove or closet installations
Minimum clearance for stable operation:
Sides
1 in. (25 mm)
If both the washer and a dryer are installed in the same location, the front of the alcove
or closet must have two unobstructed air openings for a combined minimum total area of
72 in.
(465 cm
2
2
Undercounter installation
A
B
Pedestal installation
22
English
Untitled-6 22
Top
1 in. (25 mm)
).
C
Rear
Front
5 in. (127 mm)
1 in. (25 mm)
A
39.6 in. (1006 mm)
B
1 in. (25 mm)
C
1 in. (25 mm)
A
5 in. (127 mm)
B
6 in. (152 mm)
52.0 in. (1320 mm)
C
2019-03-15 PM 3:42:15