Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
Surface of the washer
Use a soft cloth with a nonabrasive household cleaner. Do not spray water onto the
washer.
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
NOTE
If a mesh filter is clogged, the "4C" information code appears on the washer's display
screen.
Untitled-6 47
1. Turn off the washer, and then unplug
the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hoses
from the back of the washer. Cover the
each hose with a cloth to prevent water
from gushing out.
4. Use pliers to pull out the mesh filter
from the inlet valves.
5. Thoroughly clean the mesh filters in
water.
6. Completely dry the mesh filters. Do not
dry in direct sunlight.
7. Reinsert the mesh filters, and then
reconnect the water hoses.
8. Open the water taps.
English 47
2019-03-15 PM 3:42:22
Publicidad
