Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Pump filter
You should clean the pump filter 5 or 6 times a year to prevent it from clogging. A
clogged pump filter may reduce the bubble effect.
48
English
Untitled-6 48
1. Turn off the washer, and then unplug
the power cord.
2. Gently press the top area of the filter
cover to open.
3. Drain the remaining water inside the
drum. See the Emergency drain section
on page 46.
4. Turn the pump filter knob (A)
counterclockwise, and then drain the
remaining water.
5. Clean the pump filter using a soft brush.
Make sure the drain pump propeller
inside the filter is not clogged.
6. Reinsert the pump filter, and then turn
the filter knob clockwise.
7. Close the filter cover.
NOTE
• Some pump filters feature a safety
knob that is designed to prevent
children from accidentally opening the
filter compartment. To open the safety
knob of the pump filter, push in and
turn it counterclockwise. The spring
mechanism of the safety knob helps
open the filter.
• To close the safety knob of the pump
filter, turn it clockwise. The spring
makes a rattling sound, which is normal.
• Before closing the filter cover, make
sure the pump filter is properly
inserted.
2019-03-15 PM 3:42:22
Publicidad
