Nikon ECLIPSE E200 Manual De Instrucciones página 75

3 Replacement of Consumable Materials
(1) Turn off the power switch (turn to " ") and unplug the power cord.
(2) Wait about 30 minutes until the lamp and its surroundings are cool enough to touch.
(3) Hold the field lens unit at the vertical grooves on both sides and pull it toward you to
remove it.
(4) Remove the old lamp.
(5) Hold a new lamp wearing gloves or using a cloth. Insert the lamp's contact pins fully
into the socket holes straight and securely.
(6) Put the field lens unit back in place.
(7) Plug the power cord.
Chapter 6 Assembly
Lamp
Field lens unit
73
Socket
6