Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT USAGE
USING THE STEAM MODE FOR MILK
1
Toggle the Mode button to select Steam.
The machine will automatically start
heating, indicated by the flashing Steam
light. The Steam light will go solid when
machine is ready for steaming.
3
Angle the Steam wand towards the Drip
tray or into a cup. Press
start. Once water turns to steam, press
button to stop.
5
Press
button to initiate the steam.
Froth until desired level of foam and
temperature is reached. To stop the steam,
press
button again.
To avoid splattering, wait until the steam
stops before removing the Steam wand
from the milk.
2
Fill the Milk pitcher with desired amount of
cold milk.
TIP: Fill to bottom of the pour spout.
4
Adjust the Steam wand to desirable
button to
position. Submerge the tip of the Steam
wand just below the surface of milk in the
Milk pitcher.
9
Publicidad
