Publicidad
Idiomas disponibles
Idiomas disponibles
2610052996_GDR GDS GDX 10/9/19 7:56 AM Page 9
Functional Description and Specifications
Allowed ambient temperature
– during operation
Please refer to the battery/charger list, included with your tool.
any assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the
tool accidentally.
▶ Inserting and Releasing Battery
Pack
Set Forward/Reversing lever 10 to the
center (locked position). Slide charged
battery pack 12 into the housing until the
battery pack locks into position (Fig. 2).
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the tool
housing, should it become loose due to
vibration.
To remove the battery pack, press and hold
the battery pack release button 13 and
slide the battery pack 12 completely out of
tool housing (Fig. 3).
Model
GDR18V-1800
Voltage 18 V
No load speed n
0
Impact rate 0–4,000
Maximum torque 1,800 in-lbs
1/4" Hex-shank
Bit/Socket Holder
with power groove
– during charging
32...113 °F (0...+45 °C)
–4...122 °F (–20...+50 °C)
– during storage
32...122 °F (0...+50 °C)
Battery Packs/Chargers
Assembly
Disconnect battery pack
from tool before making
GDS18V-1800
18 V
0–3,400/min
n
0–3,400/min
0
0–4,200
1,800 in-lbs
1/2" Square drive
with Friction Ring
and Thru-Hole
Fig. 2
12
9
GDX18V-1800
18 V
n
0–3,400/min
0
0–4,200
1,800 in-lbs
1/2" Square
drive and 1/4"
Hex-shank with
power groove
Fig. 3
13
12
Publicidad
