Bestron AFT80ZRC Manual Del Usuario página 24

OPERATION - General
The appliance is intended
only for domestic use, not
for professional use.
A. LED display
B. Control panel
C. Remote control
D. Housing
E. Crosshead screws
F. Foot halve
G. Foot halve
H. Power cord and plug
OPERATION - Before use for the first time
Remove the fan from the packaging and remove all packaging materials.
OPERATION - Assembling the foot
1. Slide the two halves of the foot into each other. Make sure
that the fan's power cord runs through the opening, with the
plug at the bottom side of the foot (see figure 2A).
2. Unscrew the 3 crosshead screws from the bottom of the fan
(2B).
2. Use the 3 crosshead screws to mount the foot to the bottom
of the fan (2C).
3. Place the power cord in the notch under the foot (2D).
A
C
B
24
Figure 1
D
Figure 2
EN