GE JEG3002 Manual De Uso Y Cuidado página 71

All manuals and user guides at all-guides.com
Ignition sequence for the Triple Ring burner
The triple ring burner knob has two sections that turn on independently:
The central burner, or the three rings of flames at the same time.
The ignition sequence is the following:
Make sure that the knobs
1
are in the off position and
the range is connected to
the electric power supply.
Push the knob in and turn it
2
to the ignition zone (marked
with a star). The central
burner will turn on at
maximum power.
When turning the knob to
3
the first stop, the flame of
the central burner will be at
its minimum power.
Ignition sequence
Center MAX
Center MAX
Both MAX
Both MIN
2
3
Center burner
power
3 600 kJ/h
2 200 kJ/h
3 600 kJ/h
2 200 kJ/h
Push in again the knob and
4
turn it in order to ignite the
three rings at maximum
power.
When turning the knob until
5
it stops, you will reach the
minimum power setting for
the three rings.
OFF Setting
4
Exterior burner
power
—
—
8 400 kJ/h
3 800 kJ/h
71
5
Total power
3 600 kJ/h
2 200 kJ/h
12 000 kJ/h
6 000 kJ/h