Tripp-Lite U203-004-R Manual Del Usuario página 2

System Requirements
l
Windows® 98, Windows® 2000
l
Mac OS 8.6 & up
l
OS/2 Warp (with USB driver installed)
l
Your PC must have USB Host controllers inside the H/W
system
Features
l
Provides four downstream ports.
l
No power adapter required (powered by PC).
l
Per-port overcurrent detection and protection.
l
Per-port power ready/overcurrent LED indicators.
l
A real Plug & Play and Hot-plugged device.
LED Definition
Port 1 - 4 LEDs (Green) - A lit LED indicates that the port is
ready for use or in operation. If an overcurrent condition occurs,
the port will immediately shut down and the LED will turn off.
The port will reset when the hub is disconnected and reconnected.
2