Descargar Imprimir esta página

JVC DLA-HD250 Manual De Instrucciones página 46

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
5
Replacing the Lamp
The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.
When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the
P45)
indicator. (
CAUTION
Pull the power plug from the power
outlet. Failure to do so may cause
injuries or electric shocks.
Do not replace the lamp immediately
after the unit has been used, and
allow a cooling period of 1 hour
or more before replacement. The
temperature of the lamp is still high
and this may cause a burn.
Do not apply shock to the lamp unit.
It may cause lamp blowout.
Do not use flammable air duster to
clean the internal parts of the unit.
This may cause fire.
MEMO
Usable Lamp Life
The usable lamp life for this unit is
approximately 2000 hours. The
usable lamp life of 2000 hours is
merely the average usable life of
lamps and we do not provide any
guarantee for this figure.
The lamp life may not reach
2000 hours depending on the
operating conditions.
When the lamp has reached the
end of its usable life, deterioration
progresses rapidly.
If the image is dark or the color tone
is abnormal, replace the lamp unit
as soon as possible.
Setting "Lamp Power" to "Standard"
will help to prolong the lamp life.
Purchasing the Lamp Unit
Please consult your authorized dealer.
Lamp Unit
Part No.: BHL5010-S
46
Procedure for Lamp Replacement
1
Remove the lamp cover
Remove the screws with a
2
Loosen the screws on the lamp unit
Loosen the screws with a
3
Pull out the lamp unit
Grasp the handle and pull out the lamp unit.
screwdriver.
screwdriver.
Handle

Publicidad

loading