JVC DLA-HD250 Manual De Instrucciones página 47

4
Install the new lamp unit
5
Tighten the screws of the new
lamp unit
●
Tighten the screws with a
6
Attach the lamp cover
●
Insert the top part (with 2 claws) of the lamp cover into
the unit.
●
Fasten the screws with a
Handle
screwdriver.
screwdriver.
ENGLISH
CAUTION
●
Use only genuine replacement parts
for the lamp unit. Also, never attempt
to reuse an old lamp unit. This may
cause a malfunction.
●
Do not touch the surface of a new lamp.
This may shorten the lamp life and
cause lamp blowout.
MEMO
After Replacing the Lamp
●
Do not place the removed lamp unit at
locations that is reachable by children
or near combustible items.
●
Dispose used lamp units in the same
way as fluorescent lamps. Follow your
local community rules for disposal.
47