Care & Cleaning
NOTE: Do not attempt to sharpen the cutting edges of the chopping blade or
the reversible disc. They are permanently sharpened at the factory and will be
ruined by attempted sharpening.
Cleaning
1 Before cleaning, be sure the unit is switched off and the cord is unplugged.
2 Whenever possible, rinse parts immediately after processing for easy cleanup.
3 Wipe the base, control panel, and feet with a damp cloth and dry thoroughly.
Stubborn spots can be removed by rubbing with a damp cloth and a mild,
non-abrasive cleaner. Do not immerse the base in liquid.
4 All removable parts can be washed by hand or in a dishwasher, top rack.
•
If washing by hand, wash in hot sudsy water, rinse, and dry thoroughly. If
necessary, use a small nylon bristle brush to thoroughly clean the bowl and
food chute/cover, this type of brush will also help prevent cutting yourself
on the sharp chopping blade and slice/shred disc.
•
If washing in a dishwasher, place removable parts on the top rack
only – not in or near the utensil basket.
5 Do not use rough scouring pads or cleansers on any plastic or metal parts.
6 Do not fi ll the bowl with boiling water or place any of the parts in boiling
water. Some foods, such as carrots, may temporarily stain the bowl. To remove
stains, make a paste of
2 tablespoons (30ml)
baking soda and 1
tablespoon (15ml) warm
water. Apply the paste to
the stains and rub with
a cloth. Rinse with sudsy
water and dry.
Storing
The 10 cup food processor
comes with a unique in-bowl
storage rack that conveniently
stores all your food processor
accessories inside the bowl
and out of the way. See the
following diagram.
Disc Stem
www.oster.com
Slice Disc
Shred Disc
Dough
Blade
Accessory
Storage Bowl
11