Publicidad
Idiomas disponibles
Idiomas disponibles
Navigation
"+" and "–" keys
The "+" and "–" keys are used to move to
the right and to the left within the selection
box. If the function selected is
temperature, these keys are used to
increase
and reduce
temperature as shown below:
Instructions for Use
Preparing the appliance
Installing the air expulsion tuben
Fit the air expulsion tube onto the fixture
with the "push" tab and thread it anti-
clockwise, Fig. 6.
Fig. 6
Housing for the air
expulsion assembly
If easier, the housing can also be
removed from the appliance by pressing
the "Push" tab and sliding it out, Fig. 7.
Fig. 7
the desired
Once out, thread the expulsion tube as
shown on Fig. 8, making sure that it is
properly secured.
Fig. 8
Then fit the assembly onto the appliance
by slotting it into position Fig. 9.
Fig. 9
Securing the diffusion duct onto the
air expulsion tube
Fit the diffusion duct onto the free end of
the tube pushing both parts gently until the
duct clicks into place. Make sure that the
clips are closed. Otherwise, the duct may
fall off. Fig 10.
54
Publicidad
