Descargar Imprimir esta página

Hansgrohe AXOR Starck 10030 1 Serie Instrucciones De Montaje página 2

Ocultar thumbs Ver también para AXOR Starck 10030 1 Serie:

Publicidad

Tools Required / Outiles Utiles /
Herramientas Útiles
This unit is listed by IAPMO for use in the USA
and Canada.
This unit meets or exceeds the following:
ASME A112.18.1
CSA B125.1
Section 1417(d) of the Safe Drinking
Water Act
Section 116875 of the California Health &
Safety Code
2
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
9 mm
• For best results, Hansgrohe recommends that this
16 mm
• Please read over these instructions thoroughly
• Keep this booklet and the receipt (or other proof
English
unit be installed by a licensed, professional plumber.
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.5 GPM
1⅜"
1½"

Publicidad

loading