LD Systems RSMP Manual De Usuario página 14

CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the device in the long term, it must be cared for regularly
and serviced as required. The care and maintenance requirements depend on the intensity of
use and environment.
We generally recommend a visual inspection before each start-up. Furthermore, we recommend
carrying out all the maintenance measures listed below every 500 operating hours or, in the
case of less intensive use, after one year at the latest. Defects due to insufficient care may result
in limitations of the warranty claims.
MAINTENANCE (user performable)
WARNING! Prior to any maintenance measures, the voltage supply and, if possible,
all device connections must be disconnected.
NOTE! Improper maintenance may impair the device or even destroy it.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used,
care must be taken to prevent damage to the unit (e.g. fans must be blocked for this case).
3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
4. In general, no cleaning agents, disinfectants or agents with an abrasive effect may be used
for maintenance, otherwise the surface finish may be impaired. Especially solvents, such as
alcohol, can impair the function of the housing seals.
5. Devices must generally be stored in a dry place and protected from dust and dirt.
MAINTENANCE AND REPAIR (by qualified personnel only)
DANGER! There are live components in the device. Even after disconnection from
the mains, residual voltage may still be present in the device, e.g. due to charged
capacitors.
NOTE! There are no assemblies in the device that require maintenance by the user.
NOTE! Maintenance and repair work may only be carried out by qualified personnel
authorized by the manufacturer. In case of doubt, contact the manufacturer.
NOTE! Improperly performed maintenance work may affect the warranty claim.
14