Magerit Metro Manual De Instrucciones página 16

ASSIGN menu
En esta sección podrás darle una función a cada potenciómetro (salvo el número 6 que está reservado
para los efectos), al botón TRIG y a cada entrada TRIG (gamma, delta y épsilon).
El potenciómetro en blanco
indica el seleccionado. La
asignación será a dicho
potenciómetro (y a su respecti-
va entrada CV)
POTENTIOMETERS
By turning the encoder you will cycle through all the parameters of all the instruments in order. After all
parameters, the first parameter of the first instrument will appear again (BD FM - Frequency).
METRO has an external clock input, ideal for synchronizing the module with other Eurorack modules.
With potentiometer 2( ) you can choose the type of external clock detection: Beat (1 beat for each clock
received) and 1/16 (4ppqn, equivalent to 1 beat for every 4 clocks received). Outside this menu, this po-
tentiometer controls the tempo.
Knob 6 is not assignable. It is dedicated to the effects control. It is also possible to navigate and select the
different potentiometers and TRIGGER inputs by pressing the encoder and, without releasing it, turning
it.
Remember that the assignments are temporarily overridden when you are in the SEQUENCER or MIXER
menu or editing the instruments' parameters. These knobs have specific functions in these screens.
Otherwise, you can make use of these assignments without any problems. When you connect a jack to
the CV input, its knob becomes an attenuverter of the input signal.
TRIG BUTTON
Since version v3.0.0 it is possible to assign different functions to this button:
- Trigger: Plays the selected (current) channel instrument.
- Reset: Resets the selected channel sequence.
- Reset (All): Resets all sequences.
- Play: Pauses or resumes the current channel sequence.
- Play (All): Pauses or resumes the sequencer.
- Random: If you are in the SEQUENCER menu, the selected channel sequence values will be chan-
ged to random ones. In any other menu, the instrument parameters will be changed.
- Tap BPM: By pressing the button several times, METRO will calculate the tempo in BPM.
Haciendo click en el encoder o
el botón , se cambiará el
potenciómetro a elegir.
Después del pot 5 entrarás en
el menú de asignación de las
entradas TRIG.
16