Magerit Metro Manual De Instrucciones página 21

MIXER menu (+EFFECTS)
Press and hold the encoder button from any window to access this menu. Each bar shows the volume and
pan of each channel.
Turn the encoder to toggle
between volume editing and
panning. The dot indicates the
edit mode.
Channels 1, 2, 4 and 5 can be controlled via CV signals. When a jack is connected, a dot will appear next
to the corresponding bar indicating the maximum value that the CV signal can reach (it coincides with the
position of the potentiometer that acts as an attenuator),.
By turning the encoder, you will reach the effects window. From version 3.0.0 two new effects are inclu-
ded: Low-Fi and Overdrive. Low-Fi allows you to lower the resolution of the final mix from 16 bits to up to
6 bits.
The potentiometer
When you exit the MIXER menu, all parameters will be saved automatically.
1 2
48 0
L
Low-Fi
Overdrive !!
Echo
Reverb
will act as an attenuator of the effects.
Magerit
3 4 5 6 CV
N
98 12 55 100
L R R L
8 Bits
30%
2%
99%
FX: 73%
By clicking on the encoder when in
volume edit mode, the CV control
can be activated or deactivated (only
in this screen). The potentiometers
will become attenuators of the CV
signal.
In this screen (volume editing
and panning only), the poten-
tiometer will control
channel 6.
The exclamations next to
Overdrive (!!) warn you of a
possible increase in the total
volume of the mix.
21