Pioneer DCS-FS303K Manual De Instrucciones página 17

4. Secure the speaker and the pole with 2
screws.
Ensure that the speaker wire does not get
pinched between the speaker and the pole.
5. After connecting, put the speaker wire
in the back of the base of the stand.
6. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic finger pad to open the connection
terminal. Insert the wire and release the
finger pad.
CAUTION
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
Installation 17
3