Pioneer DCS-FS303K Manual De Instrucciones página 39

Recording to USB
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION.
Play back a sound source first.
3 Start the recording by pressing
4 To stop recording, press x STOP.
Recording Music file in disc source to
USB
One track recording - You can record to USB
after play you want file.
All tracks recording - You can record to USB
after stop.
Program list recording - After moving to the
programmed list and you can record it to
USB.
• You can check the recording percentage rate
for the USB record on the screen during the
recording.
USB REC.
z
• When you stop recording during playback, the
file that has been recorded at that time will be
stored.
• Do not remove the USB device or turn off
the unit during USB recording. If not, an
incomplete file may be made and not deleted
on PC.
• If USB recording does not work, the message
like "NO USB", "ERROR", "USB FULL" or "NO REC" is
displayed on the display window.
• When you stop recording during playback, the
file will not be stored.
• In the state CD-G, DTS disc USB record is not
operated.
• You may not store more than 999 files.
• It'll be stored as follows.
AUDIO CD
The making of unauthorized copies of copy-
protected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes.
NOTE
MP3/ WMA
Be responsible
Respect copyrights
Operation 39
4
The other
source