BLUEHELIX PRO RRT 24 C
Disassembling the burner and cleaning the exchanger
3.5 mm
•
Disconnect the power supply and turn off the gas cock ahead of the valve.
•
Undo the 5 screws securing the exchanger cover.
•
Undo the 3 screws securing the burner.
•
Check the correct distance of the electrodes.
•
To clean the exchanger, it is advisable to remove the electrode (see fig. 44)
•
Clean the inside of the exchanger with the accessories indicated in fig. 41.
Do not use metal brushes which could damage the exchanger.
EN
fig. 41
cod. 3541Q530 - Rev. 00 - 10/2018
2
1
189