Publicidad
Idiomas disponibles
Idiomas disponibles
9.
Remove the 3 screws from the searing side burner.
10.
Remove the searing side burner.
11. Remove the 2 screws that are pre-attached to the valve.
Do not screw out fully. Insert the searing side burner valve
into the searing side burner shelf control panel. Align the
screws on the valve with the large side of the holes on the
bezel. Slide the screws down to the smaller holes and tighten
the screws to secure.
12. Place the searing side burner removed in step 10 on the
searing side burner bowl assembly, adjust the searing side
burner till the searing side burner tube slides over the valve
burner till the searing side burner tube slides over the valve
orifice. Tighten the 3 screws removed in step 9.
14
13. Connect electrical plugs on underside of searing side
burner.
A
A. Electrical plug from grill
B. Electrical plug from sear burner
B
B
A
A. Bezel
B. Valve stem
B
Publicidad
