Publicidad
Idiomas disponibles
Idiomas disponibles
Storing and Using Presets
1. To store a preset, select the desired frequency using " " or " " buttons.
Press and hold the desired preset button (1, 2, 3, or 4) for two seconds. An audible
beep sounds when the new frequency is programmed*. The iPod nano display
reflects the change when the memory button is released by showing which memory
button was pressed followed by the frequency saved in that memory position.
* Do NOT remove the iPod nano from the cradle until it returns to the Main Menu
screen or new settings may not be saved.
2. To select a preset frequency, momentarily press "1", "2", "3", or "4". This instantly
tunes the FM transmitter to the frequency stored in that preset.
�������� �� ��� ���� ����
�������� �� ��� ���� ����
������ ��� ���� ����
������ ��� ���� ����
ea_F8Z063ea.indb 7
All manuals and user guides at all-guides.com
Frequency display
Frequency selector
Memory station
display
Memory stations 1 - 4
Storing and Using Presets | 05
En
15/8/06 12:3
Publicidad
