Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Radio
Operation
NOAA* All Hazards
Hazards Radio Icon
Radio Channels and Alert
You can use your microTALK
NOAA All Hazards Radio channels transmitting
in your area.
Alert Icon
You can also program your microTALK
to sound a tone alert when a local NOAA
channel activates an Emergency All Hazards
Alert. This will warn you of weather, chemical,
and other civilian emergencies.
To Listen to All Hazards Radio channels:
Mode Button
1. Press the Mode button until the Weather
(All Hazards Radio) icon, the currently
selected All Hazards Radio channel,
and signal strength are displayed.
Hazards Radio Icon
2. Use the Channel Up or Channel Down
button to change All Hazards Radio channels.
3. Weather (All Hazards Radio) icon will continue
to be displayed when All Hazards Radio is On.
Channel Button
a. Press the Mode button to proceed
to other functions.
b. Press the Lock button to exit All
Hazards Radio channel mode and
return to Standby Mode.
To Turn On All Hazards Alert:
Mode Button
1. Press the Mode button until the Alert icon flashes
and the current On or Off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn All Hazards Alert On or Off.
Alert Icon
3. Alert icon will continue to be displayed
when All Hazards Alert is On.
a. Press the Mode button to enter the new
setting and proceed to other functions.
Channel Button
b. Press the Lock button or do not press any
buttons for 15 seconds to enter the new
setting and return to Standby Mode.
c. Press the Talk button to enter the new
settings and return to Standby Mode.
10 English
*National Oceanographic and Atmospheric Administration
All manuals and user guides at all-guides.com
•
®
radio to listen to
®
radio
Introduction
Operation
Stopwatch
You can use the time keeping feature of your
microTALK
®
display of split times. After starting the timer,
you can view an interim "split" time while the
first timer continues to run.
To Activate Stopwatch Mode:
Mode Button
1. Press the Mode button until the Stopwatch
icon and "OO:oo:oo" is displayed in the LCD.
2. Press the Channel Up button to
start the stopwatch.
Stopwatch Icon
3. Press the Channel Up button again
to stop the stopwatch.
To restart and stop the stopwatch,
repeat step 2 and 3.
Channel Up
4. Press the Mode button to exit Stopwatch
Mode and proceed to other functions.
To Activate Split-Time in Stopwatch Mode:
1. Press the Mode button until the Stopwatch
Mode Button
icon and "OO:oo:oo" is displayed in the LCD.
2. After starting the stopwatch (see above),
press the Channel Down button to start the
split-time timer. The display will stop, but the
stopwatch will continue in the background.
Stopwatch Icon
3. Press the Channel Down button to return
to the stopwatch. (To stop the stopwatch,
see above.)
To restart and stop the Split-Timer,
Channel Down
repeat step 2 and 3.
4. Press the Mode button to exit Stopwatch
Mode and proceed to other functions.
Customer Assistance
Warranty
radio as a stopwatch, including the
Nothing comes close to a Cobra
•
™
11
Publicidad
