Activating Demonstration Mode; Diagnosis Mode; Adjustment Mode - BUBEN&ZORWEG TIME MOVER Instrucciones De Uso

EN

3.5 ACTIVATING DEMONSTRATION MODE

52

3.6 DIAGNOSIS MODE

3.7 ADJUSTMENT MODE

Procedure: stay in the SETUP menu and press and hold the top cursor
button until DEMOMODE appears (fl ashing) in the information fi eld
Press the OK button once more: the watch winder will briefl y guide you
through its various functions. As each function is demonstrated the dot in
the main menu will light up and/or the corresponding text will appear in
the information fi eld
The demonstration mode will start again automatically when it fi nishes.
You can cancel the demonstration mode at any time by pressing any but-
ton. The cursor will then switch to AUTO mode.
This mode is specifi cally for programming and After Sales Service.
This mode is specifi cally for programming and After Sales Service.
.
G
.
G