Winding In Manual Mode - BUBEN&ZORWEG TIME MOVER Instrucciones De Uso

EN

5.2.2 WINDING IN MANUAL MODE

59
®
Settings for 1 TIME MOVER module in one BUBEN&ZORWEG
masterpiece.
Procedure: fi rst activate the AUTO mode (fl ashes) in the main menu .
A
Press and hold the right cursor button until selecting the direction of
rotation is activated (fl ashes). This can be changed using the top and
F
bottom cursor button where necessary.
Then press the OK button to confi rm your input or press the right cursor
button to navigate to the fi eld for the number of revolutions .
H
As soon as the revolutions display fl ashes you can change the number of
revolutions per day between 650 and 1800 in steps of 50 by pressing the
top or bottom cursor button.