Kärcher LT 380/36 Bp Manual De Instrucciones página 16

tool becomes entangled in wires
or cords. Inspect the work area
thoroughly for objects such as
stones, sticks, metal, wires,
bones or toys and remove these
before using the device.
WARNING ● The device is
not intended for use by children,
persons with restricted physical,
sensory or mental abilities or
persons unfamiliar with these in-
structions. ● Use the device only
in daylight or under good artifi-
cial lighting. ● Do not operate
the device on wet grass or in the
rain. ● Maintain a minimum dis-
tance of 15 m from persons and
animals. Stop the device when
any persons or animals enter
this area. ● Keep the cutting
head below the level of your
hips. ● Never use the device
with damaged or absent safety
devices. ● Never use a metallic
cutting string. ● Only operate the
device outdoors. ● Keep your
hands and feet away from the
cutting area, especially when
switching on the motor. ● Dan-
ger of injury. The blade on the
protective cover for shortening
the cutting string is very sharp
and you must avoid touching
this, especially when cleaning
the device. ● Make sure that the
ventilation openings are free of
deposits. ● Check the device for
damage before each use and af-
16
ter any impacts. Damaged parts,
e.g. a switch, must be repaired
or replaced by the authorised
Customer Service department.
● Ensure that the drive head at-
tachment is correctly fitted and
fastened. ● Ensure that all pro-
tective devices, deflectors and
handles are correctly fitted and
securely fastened. ● Check that
the string cutter is correctly posi-
tioned and secured each time
before use. ● Use only replace-
ment strings from the original
manufacturer. Do not use any
other cutting attachment. ● Dan-
ger of injury. Do not make any
modifications to the device.
Note ● Regulations may restrict
the use of this device in some
regions. Seek advice from your
local authorities.
Safe servicing and care
WARNING ● After pushing
out a new string, bring the de-
vice into the normal operating
position before switching it on.
● Ensure that the device is in a
safe condition by regularly
checking that all bolts, nuts and
screws are screwed tight.
● Check that the moving parts
function correctly and are not
blocked, and that no parts are
broken or damaged. Have a
damaged device repaired before
using it. ● Switch the motor off,
remove the battery pack and
English