Publicidad
Idiomas disponibles
Idiomas disponibles
Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales
service department of our company and the customer should not dismantle the
machine without permission.
If the washer can not work normally, and the abnormal indication is shown in the
display tube window or the machine alarms, please check and correct as
follows.
DISPLAY*
CAUSE
Alarm of water intaking or
making up over 1 hour.
DrainageTime ≥ 6 min Water
Level switch is not reset.
The lid is not close before
spin.
Alarm for shocking in the
same spin process third
times.
Alarm for water level sensor.
Electronic door lock
malfunction.
Child lock light flashes.
On
Off
*Flickering simultaneously.
33
All manuals and user guides at all-guides.com
SOLUTION
Check the water tap is
opened or not.
Check the water level sensor
and the drain pump
Closed the door.
Please keep the clothes
balance.
Replace Water Level sensor.
Check door lock.
Communication failure.
Abnormal display and alarm of the washer
When the washer is in trouble, please contact local service office or the sales
service department of our company and the customer should not dismantle the
machine without permission.
If the washer can not work normally, and the abnormal indication is shown in the
display window or the machine alarms, please check and correct as follows.
DISPLAY
CAUSES
E1
Alarm of water intaking or
making up over 1 hour.
E2
Drainage Time≥ 6min Water
Level switch is not reset.
E3
The lid is not close before spin.
E4
Alarm for shocking in the same
spin process third times.
F8
Alarm for water level sensor.
C9
When the communication failure.
Fd
Door lock malfunction.
METHODS
Check the water tap is
opened or not.
Check the water level sensor
and drain pump.
Closed the door.
Please keep the clothes
balance.
Replace Water Level sensor.
Re-allocation of the
communication terminal plug.
Check door lock.
34
Publicidad
