4. Buzzing
Alarming, Buzzing 10s, interval
15m, alarming 10s again, So
circulates, until alarm remove, or
Automatic Power Off after 1h.
Control of program running time.
1. Drainage time
Program drainage time = time water from drainage to reset + Drainage
delay.
Time water from drainage to reset means start from drainage to electronic
fell to reset water-level. Drainage delay is what starts from fell to reset
water-level to drainage time for fixed 3 minutes.
2. Water replenishing
During the washing sub-process, both washing and rinsing process have
water-replenishing test. In the washing sub-process, machine will suspend
working during the last three seconds of each minute of washing. Three
seconds later, it will measure the water level and turn to the water-
replenishing process if the result turns out to be below the preinstalled
level.And it will turn to the former washing sub-process once the water level
reaches the preset level.
3. Soak
Specific procedures of immersion time are not the same.
Sheets: Soak 15Min
Comforters: Soak 30Min
Jeans: Soak: 15Min
Heavy-duty: Soak 30Min
Soak 15Min: wash 1Min, soak 2Min
Soak 30Min: wash 1Min, soak 4Min
39
All manuals and user guides at all-guides.com
Buzz number
Buzz time(s)
Buttons on
0,1
1
electricity
Alarming
10
1
0,5
6
End of run
4. Washing
Flooding water meet set point, program entry washing process. Due to
different choice of program, washing in different flow beats. Every time the
program washing or finished washing, there will be a balance washing.
Washing beats: divide into three areas - NORMAL, HEAVY, DELICATE
OPTION area used NORMAL beat.
5. Drift off and spin process
In the whole drift off sub processes and spin process operation, draw off
valve and drain on keep open, except braking sub processes and pause.
Drainage began, open draw off valve, Open drain valve on. When pause,
first close draw off valve, close drain valve on after 5S.
6. Prewashing process
First inflow water to 2 files levels, wash 5 min., drainage, dewatering 3 min.,
then normal washing process.
7. Program run time parameter list
Area
Program Water
Wash
soak
wash
drain
Normal White
4 min.
3 min.
9/12/15/18
min
Color
4 min.
3 min.
Heavy
Heavy
4 min.
30 min.
3 min.
duty
Synthetic
4 min.
3 min.
Delicate
Wool
4 min.
3 min.
Rinse &
4 min.
3 min.
spin
9/12/15/18
Soak
4 min.
3 min.
Prelavado
min
Option
Quick
4 min.
6 min
3 min.
Only spin
Rinse (1)
Rinse (2)
rinse
rinse
spin
water
drain
Spin
Water
Drain
water
water
5 min. 4 min.
6 min.
3 min.
5 min.
4 min.
6 min.
3 min.
5 min. 4 min.
6 min.
3 min.
5 min.
4 min.
6 min.
3 min.
5 min. 4 min.
8 min.
3 min.
5 min.
4 min.
8 min.
3 min.
5 min. 4 min.
5 min.
3 min.
5 min.
4 min.
5 min.
3 min.
5 min. 4 min.
5 min.
3 min.
5 min.
4 min.
5 min.
3 min.
5 min. 4 min. 6 min.
Sin enjuague
5 min.
4 min.
6 min.
3 min.
5 min.
4 min.
6 min.
3 min.
Sin enjuague
5 min.
4 min.
6 min.
3 min. 3 min.
Spin
Spin
3/5/7
min/
estándar
5/7/12
min/
estándar
5/7
min/
estándar
5 min.
5 min.
40