Defiant DFI-7167-WH-G Guía Para El Uso Y Cuidado página 7

Installation (continued)
Installing the light fixture
This light fixture (B) has been designed to mount
to multiple surfaces. Choose the desired location
and then the mounting method that is best for that
location.
3
Installing the light fixture to a
wall or eave
NOTE: Make sure there is enough vertical space above
the mounting plate to allow the light fixture to be mounted.
□
Place the mounting plate (F) against the
mounting surface and ensure the mounting
plate (F) is level. Mark the hole locations.
□
If mounting to a wooden surface, drill two
3/32 in. holes into the mounting surface.
Install the two mounting screws (AA)
through the mounting plate (F) and into
the mounting surface.
□
If mounting to wall board or brick, drill two
7/32 in. holes into the mounting surface.
Insert the wall anchors (BB) and attach the
mounting plate (F) using the two mounting
screws (AA).
□
Slide the rear of the light fixture (B) down onto
the mounting plate (F) until it snaps into place.
To remove the light (B) from the mounting plate (F),
press the tab (2) on the bottom of the mounting plate
(F) and slide the light (B) off.
All manuals and user guides at all-guides.com
□
Wall or eave mount - proceed to step 3.
□
Gutter mount - proceed to step 4, page 8.
□
Post mount - proceed to step 5, page 8.
AA
7
Please contact 1-866-308-3976 for further assistance.
F
U T
E O
S I D
I S
T H
BB
B
M
H
L
F
2
HOMEDEPOT.COM