Publicidad
Idiomas disponibles
Idiomas disponibles
Program schedule override (temporary)
1 Press
or
to adjust the temperature.
2 Once at the desired setpoint temperature,
no further action is needed. The new
setpoint temperature will be held until the
next scheduled time period begins. For more
information on schedule time periods, see
"Program schedule" on page 4.
3 To cancel the Temporary Hold, Press
and then press Cancel.
Program schedule override (permanent)
1 Press
or
to adjust the temperature.
2 TEMPORARY HOLD is displayed and
the setpoint temperature flashes. While
it's flashing, press Hold (Mode) button to
change to Permanent Hold.
3 To cancel the Permanent Hold, press
and then press Cancel.
NOTE: Depending on which temperature
control mode the thermostat is configured for
(see page 2), you will be adjusting either
air or floor temperature. Floor temperature will
be indicated with FLR text above the actual
temperature value. Floor temperature setpoint
is hidden on home screen in this case and will
be displayed again by pressing
or
or
or
.
5
Hold
Publicidad
