Imetec ECO FH5-100 Instrucciones Y Advertencias página 7

G E N E R A L
DESCRIPTION OF APPLIANCE AND ACCESSORIES
Thermostat
b Power selector switch
c Motor unit and air outlet grid (front)
APPLIANCE A/B
• Power selector switch
POSITION
• Room thermostat
The thermostat maintains the desired temperature: once reached, the appliance automatically turns off and will turn on again as soon as
the temperature level drops.
POSITION
MAX
I N S T R U C T I O N S
Fan heater function
- Turn the power selector switch as seen below according to the desired type of heating:
position : ECO heating;
position : Rapid heating.
- Regulate the thermostat depending on the temperature you wish to maintain.
Cool air facility
- Turn the thermostat to the maximum temperature MAX.
- Turn the power selector switch to position
ntifreeze function
This function maintains the room temperature at +5°C.
When the temperature drops below this level, the fan heater turns on automatically.
- Turn the thermostat to the antifreeze setting .
- Turn the power selector switch as follows:
position to gradually increase the temperature by +5°C.
position to quickly increase the temperature by +5°C.
USEFUL ADVICE
Whenever you put the fan heater away, make sure that it is protected from dust, to prevent it from entering through the grids.
All manuals and user guides at all-guides.com
FUNCTION
Appliance off
Cool air
Warm air with Eco function
Rapid heating
FUNCTION
Antifreeze
Maximum temperature
.
I N S T R U C T I O N S
d Air inlet grid
F O R
5
U S E
E
N
G
L
I
S
H