Publicidad
Idiomas disponibles
Idiomas disponibles
tubes not exceeding 5-6 mts is recommended.
IMPORTANT:
FIGURE 3 AND THE EXPLODED
VIEWS, ARE NECESSARY
IDENTIFY AND ORDER SPARE
PARTS.
6.2. COMPLETE RANGE OF APPLICA-
TIONS
Your roller ironer has been designed to iron
woolens, cottons, linen, silk and different
types of synthetic fabrics. Set the appropriate
operating temperatures on the thermostat
according to the instructions provided in this
booklet.
6.3. INFORMATION REGARDING THE
ELECTRICAL INSTALLATION
The electric installation inside the appliance
is made up of safety and control devices
which are placed on an appropriate plate
inside the right-side panel. Diagrams and
detailed lists may be found further on in this
booklet.
6.4.
DOCUMENTS
CERTIFYING
MACHINE CONFORMITY
The roller ironer described in the present
manual complies with the following stan-
dards:
73/23/CEE, 93/68/CEE
89/336/CEE, 92/31/CEE, 93/68/CEE
and standards:
EN 60335-1, EN 60335-2-44
EN 55014, EN 61000-3-2, EN 61000-3-3
EN55104
7. INFORMATION REGARDING THE
OPERATION OF THE APPLIANCE
7.1. RUNNING THE APPLIANCE
Switch the appliance on by wall cutout switch
ahead of the appliance and the switch on the
right side of the appliance. The yellow LED
on the control panel will then light up to
indicate that the machine is being powered.
When the START push button is pressed the
green LED and relevant displays will light
up, respectively indicating the effective
temperature and the selected speed (on
appliances featuring a speed regulator only).
TEMPERATURE ADJUSTMENT
The control panel features three push buttons
for temperature adjustment: "+", "-" and
"SET". The display shows the instant
temperature value at the ironing basin.
To display the set temperature value press
the "SET" push button. As the setting flashes,
it is possible to either increase or decrease
the set value by the "+" or "-" buttons. If no
button is pressed for a few seconds the
display will return to its normal mode and
the ironing basin will resume heating.
When the set temperature is reached the
All manuals and user guides at all-guides.com
value tends to remain stable within a narrow
temperature range.
NOTE: Variations of ±5-8°C have no effects
on ironing quality. When the first clothes are
TO
introduced the temperature will drop by a
few degrees and then it will return to the set
value. This is absolutely normal and so is the
continuous switching on and off of the heating
system.
Furthermore, during the first hours of use, a
smell produced by the insulation coating on
the heating elements may come out from the
basin casing slots. Such a smell is absolutely
harmless and will disappear after a few hours
of work.
BASIN MOVEMENT
When the pedal lever is pressed the roller
starts revolving in the working direction and
the heating basin is laid down until it presses
against the roller
To bring the ironing basin back to its resting
position just push on the pedal again, so that
the basin is lifted and the roller revolves in
the opposite direction.
It is possible to invert the direction while the
basin is being lifted and before it has reached
its top position. This will speed up work
remarkably.
WARNING: for energy-saving purposes,
the appliance will go off automatically
after the pedal has been idle for 20 minutes.
The basin will then be brought to its resting
position and the STOP yellow LED on the
control panel will go on.
SPEED ADJUSTMENT
FOR SPECIAL MODELS ONLY
The driving speed can be adjusted by using
the "
" and "
" push buttons.
The adjustable speed ranges from 2 to 4 m
per minute, which correspond to settings
from "1" to "7".
The possibility to change the driving speed
provides higher versatility to the machine,
which will easily cope with the various fabrics
to be ironed.
FINISHING THE IRONING JOB
At the end of the working day it is advisable
to allow the roller to turn for a couple of mi-
nutes with the basin in its working position
and a medium-low temperature setting in
order to let humidity evaporate from the
roller cover.
To switch the appliance off just press the
STOP push button. If the basin is in its
resting position the machine will go off
normally. Conversely, if the roller is still
turning the basin will be lifted and only then
the machine will be put off.
Then cut off the power supply by turning off
both the built-in cutout switch and the wall
cutout switch.
10
COIN-OPERATED MACHINES
Machines equipped with a coin-meter are
switched on by the insertion of the appropriate
coin and will go off as soon as the
programmed runtime has elapsed. The
procedure followed to switch the machine
off is the one described above for ordinary
machines, except for the fact that it is carried
out automatically, with no need for the user
to operate any device.
The instructions for the change of factory
runtime values are delivered along with such
special appliances.
CAUTION: Never leave the ironing basin
in contact with the roller while hot, as this
will damage the roller cover quickly.
The emergency push button on the
machine must be actuated only in case of
danger for the user and must not be used
to switch the appliance off normally.
7.2. USEFUL ADVICE
Sort out the laundry to be ironed according
to the type of fabric and start ironing the
garments requiring low-temperature. Leave
the most resistant fabrics last and gradually
increase the ironing temperature through the
thermostat. You will then start ironing sooner
without having to wait for the basin to cool
when shifting from high to low tempera-
tures.
The items to be ironed must contain a
relative humidity ranging between 10 and
20%. In the S140/25 with lamellar padding
version this range is extended from 10% to
as much as 40-45% R.H., by virtue of the
appliance's extracting system and adjustable
driving speed (which is included as standard
in this model).
The following table indicates the appropriate
temperature settings for the different types
of fabrics. It also contains the current symbols
used by the textile industry:
FABRIC Symbol* Indicat.
Perlon/arti-
•
Low
ficial silk
Silk-wool
• •
Medium
Cotton-linen
• • •
High
200°C
150°C
110°C
* These symbols (inside an icon representing
a traditional iron) are currently seen on the
labels applied to garments.
WARNING: Starched laundry must be
ironed last.
Press the luminous start push button (make
sure that the green LED lights up). The
machine will then be ready for use. Then
select the desired temperature as explained
above. With the basin standing in its resting
position, it will be possible to start working
as soon as the set temperature is reached.
Lay the clothes to be ironed on the wooden
Temperature
max. 110°C
max. 150°C
max. 200°C
Publicidad
