Ryobi RY170PWA Manual De Instrucciones página 6

■ Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that the
product is in safe working condition. Any part
that is damaged should be properly repaired
or replaced by an authorised service centre.
KNOW YOUR PRODUCT
See page 147.
1. Carry handle
2. High pressure hose
3. Hose reel
4. Reel handle
5. Rolling support
6. Adapter clip
7. Internal high pressure hose
8. Detergent tank cap
9. Detergent tank
10. Lance hook
11. Power cord holder
12. Trigger gun holder
13. On/off switch
14. Handle screws
15. Water inlet filter
16. Nozzle cleaning tool
17. Water inlet port
18. Wheel
19. Detergent function switch
20. Nozzle holder
21. Trigger handle lock
22. Trigger
23. Hose lock button
24. Turbo lance
25. Vario lance
26. QC adapter
27. Operator's manual
28. Garden hose
29. RYOBI detergent
30. Garden hose connector
NOTE: If using a detergent, refer to the Material
Safety Data Sheet of the detergent.
SAFETY DEVICES
■ On/Off switch
– The on/off switch prevents unintentional
operation of the product.
■ Trigger handle lock
– The trigger handle lock locks the trigger
and prevents unintentional opening of
the high-pressure jet.
6
Original Instructions
■ Overflow valve with pressure switch
– The overflow
permissible working pressure from being
exceeded. If the lever on the trigger gun
is released, the pressure switch turns
off the pump and the high-pressure jet
stops. If the lever is pulled, the pump
turns on again.
■ Overload protection
– A thermal sensor protects the product
from overloading. The product will
automatically shut the power down while
overheating.
SYMBOLS ON THE PRODUCT
Read and understand all
instructions before operating
the product. Follow all warnings
and safety instructions.
Wear eye and hearing
protection.
Power
The product is not suitable
for connection to the drinking
water mains without backfl ow
preventer.
Never point the spray wand to
people, animals, the body of
the product, power supply, or
any electric appliances.
Maximum pressure
European Conformity Mark
British Conformity Mark
EurAsian Conformity Mark
valve prevents the