Descargar Imprimir esta página

Graco ISPB053HA Manual De Uso página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Vehicle belts MUST lay flat against child and MUST not be twisted.
16
dO NOT use shoulder belt loose or positioned under child's arm.
dO NOT position vehicle belt over top of the armrests. It must pass under-
17
neath the armrests.
Make sure vehicle belt is NOT twisted.
Lap portion of lap/shoulder belt MuST be low and snug on hips, just
touching thighs.
dO NOT allow child to slide down in booster seat. If child will not keep
18
vehicle restraint properly positioned, dO NOT use this booster seat. Use a
different child restraint system.
Vehicle seat headrest must not interfere with booster seat head support.
19
The front of booster seat MuST NOT hang over front of vehicle seat.
The back of the booster seat MuST fit tight against the vehicle seat back
20
as shown.
Booster Seat Positions
Your booster seat has two positions as shown.
21
The back of the booster seat MuST fit tight against the vehicle seat back as
22
shown in either the first or second position.
dO NOT uSE booster seat beyond reclined position.
23
Securing your Child in vehicle
24
Place booster seat firmly against the back of a forward-facing vehicle seat
equipped with a lap/shoulder belt only.
Have your child sit in booster seat with their back flat against back of
booster seat.
25
Position shoulder belt through the shoulder belt guide shown in
NOT as shown in
26
tighten.
To ensure the correct head support height is obtained, the bottom of the
27
headrest MuST be even with the top of child's shoulders as shown
28
in
and the shoulder belt must be positioned in the red zone as
27
shown in
28
. Fasten buckle and pull up on the shoulder belt to
26
.
16
,
25

Publicidad

loading