Presetting The Rds Stations With The Af And Ta Data; Recording The Traffic Announcements; Traffic Information Replay (Tir) - Sony XR-C850RW Manual De Instrucciones

Presetting the RDS
stations with the AF and
TA data
When you preset the RDS stations, the unit
stores each station's data as well as its
frequency, so you don't have to turn on the AF
or TA function every time you tune in the
preset station. You can select a different setting
(AF, TA, or both) for each preset station, or the
same setting for all preset stations.
Presetting the same setting for all
preset stations
1
Select an FM band.
2
Press (AF/TA) repeatedly to select either
"AF on," "TA on" or "AF TA on" (for both
AF and TA functions).
Note that selecting "AF TA off" stores not
only RDS stations, but also non-RDS
stations.
3
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "B.T.M" appears.
4
Press (4) (n) until "B.T.M" flashes.
5
Press (SHIFT).
Presetting different settings for
each preset station
1
Select an FM band, and tune in the
desired station.
2
Press (AF/TA) repeatedly to select either
"AF ON," "TA ON" or "AF TA ON" (for
both AF and TA functions).
3
Press the desired number button for two
seconds until "MEM" appears.
Repeat from step 1 for presetting other
stations.
Tip
If you want to change the preset AF and/or TA setting
after you tune in the preset station, you can do so by
turning on/off the AF or TA function.
Recording the traffic
announcements

—Traffic Information Replay (TIR)

You can listen to the latest traffic
announcements by recording them. The unit
automatically records and stores up to eight
traffic announcements. If the recording
exceeds eight minutes (XR-C850RW/
C850RDS), or four minutes (XR-C750RDS), the
recorded announcements are updated, so you
can always hear the latest information.
The TIR function turns on the unit
automatically and records the traffic
announcements for up to two hours before and
after a preset time.
Presetting the time and the station
1
Press (TIR) for two seconds until "TIR"
lights up in the display.
2
Press (4) (n) repeatedly until "TIR on"
appears.
T I R
SUR EQ
TIR on
3
Press (TIR) repeatedly until the time
indication appears.
T I R
SUR EQ
1 Set the hour by rotating the dial.
T I R
SUR EQ
2 Press (4) (n) until the minute digits
flash.
T I R
SUR EQ
3 Set the minute by rotating the dial.
T I R
SUR EQ
4
Press (TIR).
5
Select the desired station by pressing the
preset number button or either side of
(SEEK/AMS).
continue to next page n
7:‚‚
1‚:‚‚
1‚:‚‚
1‚:1‚
EN
11