Labeling A Cd; Disc Memo/Custom File - Sony XR-C850RW Manual De Instrucciones

2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
C D 1
DISC TRACK
SUR EQ 2 4 P1.‚2
PLAY MODE
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, " ∗ Mem full ∗ " appears in
the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Erasing the tracks in the
programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P1" above.
To select Programme 2, press (4) (n)
repeatedly until "P2" appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
C D 1
DISC TRACK
SUR EQ 2 4 P1.‚6
PLAY MODE
The track currently registered in slot 6 of
Programme 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
DISC TRACK
SUR EQ - -- P1.‚6
PLAY MODE
4
To continue erasing tracks, repeat steps
2 and 3.
Track slot number
Track Slot Number
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6
Press (SHIFT).

Labeling a CD

— Disc Memo/Custom File

(CD changer with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name (page 20) and select the specific tracks
for playback (page 20).
1
Play the CD and press (PTY/LIST) for two
seconds.
C D 1
DISC NAME
SUR EQ 4 ________
2
Enter the characters.
1 Rotate the dial clockwise direction to
select the desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
C D 1
DISC NAME
SUR EQ 4 S_______
If you rotate the dial counterclockwise,
the characters appear in reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
C D 1
DISC NAME
SUR EQ 4 S_______
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to the normal CD playback
mode, press (PTY/LIST) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
EN
19