Choose the stick (F/H) corresponding to the
required use, lock it on the body (E) and turn
clockwise until you hear a "click".
Plug the power cord into an AC outlet.
Insert vertically the mixer in a bowl or any other
container with high edges.
Note: To avoid splashes, turn the unit on only when the
mixer is already into a bowl.
To turn on the device, press and hold the low
speed button (B) or high speed button (D).
Speed is also adjustable through the Inching
switch button (A)
Mix the ingredients by moving the mixer slowly
up and down and in a circular manner.
WATCH OUT! Do not insert a spatula or other utensil into
the container while the mixer is operating. You can only
do it when the mixer is off.
Do not use the unit for more than 15 seconds without
any food or more than 1 minute continuously. Then let
the unit cool for at least 1 minute before using it again.
After use, unplug the mixer from the outlet.
Dismantle the blender and proceed with their
cleaning.
All other parts can be cleaned in the dish washer.
However, after processing very salty food, you
should rinse the sticks right away.
USE OF THE BLADES