Hansgrohe AXOR Urquiola 11443 1 Serie Instrucciones De Montaje / Manejo / Garantía página 2

English
Technical Information
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate - 11446001
handshower
spout
Flow rate - 11443001
handshower
spout
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• This trim kit requires rough valve 13444181 and
mounting plate 39449001 (not included). The
rough valve and mounting plate must be installed,
and the mounting surface complete and made
watertight before installation of this trim kit.
• 11446001 only: The showerhead is for use with
an automatically compensating valve rated at
1.3 GPM (4.9 L/min) or less.
• 11443001 only: The showerhead is for use with
an automatically compensating valve rated at
1.5 GPM (5.7 L/min) or less.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
max. 1.75 GPM (6.6 L/min)
6.1 GPM (23.1 L/min)
max. 2.0 GPM (7.6 L/min)
6.1 GPM (23.1 L/min)
• This unit is not anti-scald. If required by local
plumbing code, install this unit in combination with
an approved remote pressure balance valve or
other approved device.
• Protection against backflow is provided by a
check valve in the handshower hose and by an
automatically resetting diverter.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.