Descargar Imprimir esta página

Fulgor Milano F4SP30 1 Serie Manual De Uso & Mantenimento página 9

Ocultar thumbs Ver también para F4SP30 1 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

To remove Oven Rack from the oven:
1. Pull rack forward
Front
2. Lift rack up at front and then remove it
Front
Oven Extendable Rack
The Extendable Rack allows for easier access to
cooking foods. It extends beyond the standard flat
rack bringing the food closer to the user.
CAUTION
When the rack is outside of the oven, slide arms
do not lock. They could unexpectedly extend if the
rack is carried incorrectly. Extending slide arms
could cause injury. Rack should only be held
or carried by grasping the sides.
To remove Extendable Rack from the oven:
1. Lift of rack slightly and push it until the stop
release
Front
2. Raise back of rack until frame and stop clear
rack guide
Front
3. Pull rack down and out
Front
To replace an Oven Rack:
1. Place rear of rack between rack level guides
Back
Front
2. While lifting front of rack, slide rack in all the
way while lowering the front
Back
Front
NOTE: Always remove the Extendable Rack before
Self-Cleaning the oven.
CAUTION! To avoid burns, pull rack all the way out
and lift pan above handle when transferring food to
and from oven.
Please refer to illustration on Page 6 if there is any
question as to which side is the front of the rack.
To replace an Extendable Rack:
1. Grasp rack firmly on both sides. Place rack
(including frame) above desired rack guide
Front
Back
2. Push all the way in until the back of the rack
drops into place
Front
Back
3. Pull both sections forward until stops activate.
Rack should be straight and flat, not crooked
Back
Front
Use & Care Manual
ENGLISH
Back
Back
Back
Back
Back
9

Publicidad

loading