Descargar Imprimir esta página

Gaggenau AI 442 Instrucciones De Uso página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing metal grease filter
m
Risk of injury!
The metal grease filters and components inside the
appliance may have sharp edges. Wear protective
gloves.
m
Risk of injury!
The metal grease filters are very heavy. Remove the
metal grease filters carefully and secure them against
falling down when doing so.
The metal grease filter consists of three components.
You can take the metal grease filters apart to facilitate
cleaning.
1
Open the lock and fold the metal grease filter
downwards. For safety reasons, the metal grease
filter is locked in place at the rear edge.
2
Slightly lift the front edge of the metal grease filter
until it can be removed from the holder.
Note: Grease may accumulate in the bottom of the
metal grease filter. Hold the metal grease filter level
to prevent fat from dripping out.
3
Remove the metal mesh filter.
10
4
Pull the two parts of the filter apart, using the
recessed grip to help you do this.
5
Clean the metal grease filter.
6
Clean the appliance from the inside.
Cleaning the metal mesh grease
filters
m
Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
Do not use any aggressive, acidic or alkaline
cleaning agents.
When cleaning the metal mesh grease filters, also
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
In the dishwasher:
Note: Slight discolouration may occur if the metal
grease filters are cleaned in the dishwasher. This has no
effect on the function of the metal grease filters.
Do not clean heavily soiled metal grease filters
together with utensils.
Remove any heavy soiling first by hand.
Place the metal grease filters in the dishwasher
leaving plenty of space around them. The metal
grease filters must not be wedged in.
By hand:
Soak the metal grease filters in hot soapy water.
Clean the filters with a brush and then rinse them
thoroughly.
Leave the metal grease filters to drain.
Note: You can use a special degreaser to remove
stubborn dirt. This can be ordered via the online shop
(product no. 00311297). Spray the dirty metal grease

Publicidad

loading