Fiorenzato F64E XGi Manual Del Usuario página 21

Display
At the top from the left, the display shows: the
room temperature, the XGi icons, the percentage
of humidity . Below is a list of the coffees made
throughout the day (Today), during the current
week (Week) and Totals . The time, date and se-
lected mode of use are shown in green .
26 °C
Today: 76
Week: 355
Total: 1571
XGi Icons
YELLOW: when grey becomes yellow for a
few seconds after dispensing, the weight
has been recorded by the system .
GREEN: the dispensed dose is within the
tolerance of the set nominal dose .
YELLOW: the dispensed dose is not within
the tolerance of the set nominal dose .
YELLOW WITH 1 or 2 BLUE SQUARES: the
doses have been re-calculated . Subse-
quent doses will be within the tolerance of
the set nominal doses .
GREY: the dispensed dose has not been
recorded by the system .
RED: an error during the weighing phase .
Important
Important Check the presence of any
objects that may alter the correct weighing pro-
cess if they come into contact with the machine .
USER MENU
To access the user menu, keep the
pressed until an intermittent sound starts
(about 5 secs .) . Three yellow buttons will light
up . Use the buttons
44%
10:30 am
Wed 1 Oct 2014
Standard
button
and to move through
the menu and change the setting . Use the but-
ton to select and confirm . Exit the menu af-
ter confirming by pressing the button
• Language
English, Italiano, Español, Français, Deutsch,
Português, Chinese, Russian, Korean, Malay-
sian, Thai, Greek .
• Time
Set time .
• Time Layout
12 or 24 hours .
• Date
Set date .
• Temperature
Centigrad or Fahrenheit .
• Brightness
Percentage .
• Information
Firmware version and Serial Number .
SETTINGS MENU
To access the user menu, keep the
pressed until an intermittent sound starts
(about 5 secs .) . Three yellow buttons will light
up .Use the buttons
the menu and change the setting . Use the
button to select and confirm . Exit the menu
after confirming by pressing the button
• Grinding Weight
Single and double dose weight adjustment .
• Calibration
Menu for calibrating the scales .
• Mills Replacement
Hours .
• Mills Reset
Reset mills timer .
• Dose Reset
Resetting the default grinding weights .
• Statistics
Show statistics .
• Manual Grinding
Activate manual grinding
• Auto-calibration
Starting or stopping the XGi grinding sys-
tem in grammes .
21
.
button
and to move through
button .
.