Publicidad
Idiomas disponibles
Idiomas disponibles
1.
PRODUCT TECHNICAL FEATURES
1.1
Destined use and Working range
ONDA623 operator is designed to automate the movement of max. 600 Kg sliding gates for residential-use, or of max. 400
kg for condominium-use.
Any other use whatsoever is not authorised by Aprimatic.
Caution
It is forbidden to use the product improperly or for different aims than those intended.
It is forbidden to tamper with or modify the product in any way whatsoever.
The product must only be installed with APRIMATIC accessories.
1.2
Residual risks
!
Warning
Take care when the gate is opening as there is a risk of injury of hands or other parts of the body in the operating area of
the operator gear.
!
Warning
The operator cannot be considered a supporting part or a safety device of the gate; the gate must be provided with adequate
support systems and safety device.
1.3
Technical data
!
Warning
The maximum weight of the gate is only a partial
parameter for determining the limits to use, as gate
sliding MUST also be taken into account.
Tab. Technical data
Single-phase power supply
Max absorbed power
Max accessories current supply 200 mA
Operating temperature
MAX WEIGHT OF GATE
Gearmotor with pinion Z 12
RATED THRUST FORCE
Gearmotor with pinion Z 12
RATED WING SPEED
Gearmotor with pinion Z 12
Degree of protection
Electric motor
Number of daily cycles
1.4
Overall dimensions
!
Warning
During the inspection in-situ the installer must ensure
there is space enough all around the gate panel suffi cient
for the overall dimensions indicated in Fig.1.
230V/115V[on demand]
50/[60]Hz
± 6%
0W
-25 / +55 °C
600 Kg
650 N
10 m/min
IP 44
2
V
Max. 100
- 14 -
ONDA 623
.
Fig
1
231,86
.
Fig
2
171,4
233,6
Aprimatic
S.p.A.
MADE IN ITALY
TYPE : ............................
ONDA 62
C.I. F
xx V
xx W
xx A
m/min
xxx N
/
IPxx
!
00P A00000000xxxxxx
Publicidad
