Publicidad
Idiomas disponibles
Idiomas disponibles
Safety and operating instructions
Overview
To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.
Design and function
These instructions apply to the CP 0222 model.
The CP 0222 is designed for light demolition and
construction work. This machine can be used both
horizontally and vertically. No other use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
pneumatic hammer for a
task
It is important to choose the correct size of
pneumatic hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
>
If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
>
If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
12
www.CrowderSupply.com • Toll Free: 888-883-5144
Main parts
CP 0222 CHIT,
CP 0222 CHITBS
Handle
A.
Trigger
B.
C.
Tool retainer
D.
Air inlet
Muffler (only BS-versions)
E.
Cylinder
F.
Labels
The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels shall be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
9800 0550 90a | Original instructions
CP 0222
CP 0222 CHOTBS
Publicidad
