Charge the battery
1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger output plug into
the round jack at the bottom end of
the device.
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely discharged, it
may take a few minutes before the
charging indicator appears on the
display or before any calls can be made.
■ Turn your device on or off
To turn your device on or off, press and hold
the Power key on top of the device for at
least 3 seconds.
■ Connect the headset
You can connect a compatible headset, such as
HS-5, to your device. See "Enhancements," p. 83.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom end
of your device. The
the start screen.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key
See "Phone at a glance," p. 9.
• Press the end key
You can also plug a compatible headset, such as the HS-9 Universal Headset,
into the 2.5 mm headset jack on your device to allow hands-free operation.
See "Enhancements," p. 83.
icon appears on
to place a call.
to end a call.
S e t u p y o u r p h o n e
15