C o n t a c t s
6. Contacts
The contacts list can hold up to 500 contacts with multiple numbers
and text notes for each contact. The amount of numbers and text entries that you
can save may vary, depending on length and the total number of entries in the
contacts list.
■ Add new contacts
You can access the contacts list at the start screen. Press the Right selection key
or, if the Right selection key on your device has a network operator menu, select
Menu
> Contacts.
Save contact name and number
1. At the start screen, use the keypad to enter the phone number you wish to save.
2. Select Save.
3. Enter the name, and select OK.
Save contact number only
1. At the start screen, use the keypad to enter the phone number you wish to save.
2. Press and hold Options.
Save an entry
1. At the start screen, select
2. Enter the name, and select OK.
3. Enter the phone number, and select
Setup phone numbers with dialing codes
Dialing codes instruct the receiving system to pause, wait, bypass, or accept the
numbers that follow them in the dialing string.
1. At the start screen, select
2. Scroll to an
(empty)
3. Enter your mailbox number, including the area code.
4. Refer to dialing codes and enter any codes as necessary.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
38
Menu
>
Contacts
OK
Menu
>
Contacts
1-touch dialing slot and select Assign.
>
Add
new.
> Done.
>
1-touch
dialing.