Makita GA021G Manual De Instrucciones página 10

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Intended use
The tool is intended for grinding, sanding, wire brushing and
cutting of metal and stone materials without the use of water.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model
GA021G
GA022G
GA023G
GA024G
GA025G
GA026G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
with BL4025
with BL4040
GA021G GA022G
100 mm 115 mm
(4") (4-1/2")
6.4 mm 7.2 mm
M10 M14 or 5/8"
(country specific)
2.8 - 3.7 kg 2.9 - 3.9 kg 3.0 - 4.7 kg 2.8 - 3.7 kg 2.9 - 3.8 kg 2.9 - 4.7 kg
BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Sound pressure
level (L ) : (dB(A))
pA
81
81
81
81
81
81
10 ENGLISH
GA023G GA024G GA025G
125 mm 100mm 115 mm
(5") (4") (4-1/2")
6.4 mm
M10
(country specific)
-1
8,500 min
413 mm
425 mm
D.C. 36 V - 40 V max
PDC01 / PDC1200
Sound power level Uncertainty (K) :
(L ) : (dB(A)) (dB(A))
WA
92
92
92
92
92
92
GA026G
125 mm
(5")
7.2 mm
M14 or 5/8"
3
3
3
3
3
3