Publicidad
Idiomas disponibles
Idiomas disponibles
SM 1619X04447 08-09:SM 1619X04447 08-09 8/19/09 1:47 PM Page 14
hot or cold for fast-charging. The charger will
automatically switch to fast-charging once a
suitable temperature is reached, or the battery
pack cannot accept a charge or the contacts of
the charger or battery pack are contaminated.
Clean the contacts of the charger or battery
pack (e. g. by inserting and removing the
battery several times) or replace the battery
pack, as required.
B TTERY
P CK
If the green indicator light
is "BLINKING RAPIDLY",
the battery pack is too
INDIC TOR LIGHT
Operating Tips
The purpose of the light is to indicate that the
battery pack is fast-charging. It does not
indicate the exact point of full charge. The light
will stop blinking in less time if the battery pack
was not completely discharged.
When the battery pack is fully charged, unplug
the charger (unless you're charging another
battery pack) remove battery pack from
charger and slip the battery pack back into the
tool handle.
FIG. 9
-14-
CH RGER
Publicidad
